3com S7906E Instruccion De Instalación

 

1-6 

Configure the current user 
ports to permit packets of the 
specified IPv6 multicast VLAN 
to pass and untag the packets 

port hybrid vlan vlan-id-list 
{ tagged | untagged } 

Required 

By default, a hybrid port permits 
only packets of VLAN 1 to pass. 

 

For details about the port link-type, port hybrid pvid vlan, and port hybrid vlan commands, refer to 

VLAN Commands in the Access Volume.  

 

In this approach, you need to configure a VLAN as an IPv6 multicast VLAN and then assign user ports 

to this IPv6 multicast VLAN by either adding the user ports in the IPv6 multicast VLAN or specifying the 

IPv6 multicast VLAN on the user ports. These two methods give the same result.  

Follow these steps to configure IPv6 multicast VLAN ports in IPv6 multicast VLAN view: 

Enter system view 

— 

Configure the specified VLAN 
as an IPv6 multicast VLAN and 
enter IPv6 multicast VLAN view 

multicast-vlan ipv6 vlan-id 

Required 

No IPv6 multicast VLAN 
configured by default 

Assign port(s) to the IPv6 
multicast VLAN 

port interface-list 

Required 

By default, an IPv6 multicast 
VLAN has no ports.  

 

Follow these steps to configure IPv6 multicast VLAN ports in interface view or port group view: 

Enter system view 

— 

Configure the specified 
VLAN as an IPv6 multicast 
VLAN and enter IPv6 
multicast VLAN view 

multicast-vlan ipv6 vlan-id 

Required 

Not an IPv6 multicast 
VLAN by default. 

Return to system view 

— 

Enter interface view or port 

interface interface-type 
interface-number 

Required