3com S7906E Instruccion De Instalación

 

1-7 

Enter VLAN view 

vlan vlan-id 

Required 

If the specified VLAN does not exist, 
this command creates the VLAN first. 

Assign one or a group of 
access ports to the current 
VLAN 

port interface-list 

Required 

By default, all ports belong to VLAN 1.

 

In VLAN view, you only assign the access ports to the current VLAN. 

 

2)  In interface or port group view 

Follow these steps to assign an access port (in interface view) or multiple access ports (in port group 

view) to a VLAN: 

Enter system view 

— 

Enter Ethernet 
interface view 

interface interface-type 
interface-number 

Enter Layer 2 
aggregate 
interface view 

interface bridge-aggregation 
interface-number 

Enter 
interface 
view 
(including 
Ethernet 
interface 
view, Layer 2 
aggregate 
interface 
view) or port 
group view 

Enter port 
group view 

port-group manual 
port-group-name 

Required 

Use either command. 

z 

In Ethernet interface view, 
the subsequent 
configurations apply to the 
current port. 

z 

In port group view, the 
subsequent configurations 
apply to all ports in the port 
group. 

z 

In Layer 2 aggregate 
interface view, the 
subsequent configurations 
apply to the Layer 2 
aggregate interface and all 
its member ports.  

Configure the link type of the 
port or ports as access 

port link-type access 

Optional 

The link type of a port is access 
by default. 

Assign the current access 
port(s) to a VLAN 

port access vlan vlan-id 

Optional 

By default, all access ports 
belong to VLAN 1.