3com S7906E Instruccion De Instalación

 

1-66 

1)  Configure PE 1 

# Run IS-IS on PE 1. 

<PE1> system-view 

[PE1] isis 1 

[PE1-isis-1] network-entity 10.111.111.111.111.00 

[PE1-isis-1] quit 

# Configure LSR ID, enable MPLS and LDP. 

[PE1] mpls lsr-id 2.2.2.9 

[PE1] mpls 

[PE1-mpls] label advertise non-null 

[PE1-mpls] quit 

[PE1] mpls ldp 

[PE1-mpls-ldp] quit 

# Configure interface VLAN-interface 11, start IS-IS and enable MPLS and LDP on the interface. 

[PE1] interface vlan-interface 11 

[PE1-Vlan-interface11] ip address 1.1.1.2 255.0.0.0 

[PE1-Vlan-interface11] isis enable 1 

[PE1-Vlan-interface11] mpls 

[PE1-Vlan-interface11] mpls ldp 

[PE1-Vlan-interface11] quit 

# Configure interface Loopback 0 and start IS-IS on it. 

[PE1] interface loopback 0 

[PE1-LoopBack0] ip address 2.2.2.9 32 

[PE1-LoopBack0] isis enable 1 

[PE1-LoopBack0] quit 

# Create VPN instance vpn1 and configure the RD and VPN target attributes. 

[PE1] ip vpn-instance vpn1 

[PE1-vpn-instance-vpn1] route-distinguisher 11:11 

[PE1-vpn-instance-vpn1] vpn-target 1:1 2:2 3:3 import-extcommunity 

[PE1-vpn-instance-vpn1] vpn-target 3:3 export-extcommunity 

[PE1-vpn-instance-vpn1] quit 

# Configure interface Loopback 1 and bind the interface to VPN instance vpn1. 

[PE1] interface loopback 1 

[PE1-LoopBack1] ip binding vpn-instance vpn1 

[PE1-LoopBack1] ip address 30.0.0.1 32 

[PE1-LoopBack1] quit 

# Start BGP on PE 1. 

[PE1] bgp 100 

# Configure the capability to advertise labeled routes to IBGP peer 3.3.3.9 and to receive labeled routes 

from the peer. 

[PE1-bgp] peer 3.3.3.9 as-number 100 

[PE1-bgp] peer 3.3.3.9 connect-interface loopback 0