3com S7906E Instruccion De Instalación

 

1-15 

Associate an IP subnet with the 
current VLAN 

ip-subnet-vlan 
[ ip-subnet-index ] ip 
ip-address [ mask ] 

Required 

The IP network segment or IP 
address to be associated with 
a VLAN cannot be a multicast 
network segment or a 
multicast address.  

Return to system view 

— 

Enter Ethernet 
interface view 

interface interface-type 
interface-number 

Enter Layer 2 
aggregate 
interface view 

interface 
bridge-aggregation 
interface-number 

Enter interface 
view or port 
group view 

Enter port group 
view 

port-group manual 
port-group-name 

Required 

Use either command. 

z 

In Ethernet interface view, 
the subsequent 
configurations apply to the 
current port. 

z 

In port group view, the 
subsequent configurations 
apply to all ports in the port 
group. 

z 

In Layer 2 aggregate 
interface view, the 
subsequent configurations 
apply to the Layer 2 
aggregate interface and all 
its member ports.  

Configure port link type as hybrid 

port link-type hybrid 

Required 

Configure the hybrid port(s) to 
permit the specified IP 
subnet-based VLANs to pass 
through 

port hybrid vlan vlan-id-list 
{ tagged | untagged } 

Required 

Associate the hybrid port(s) with 
the specified IP subnet-based 
VLAN 

port hybrid ip-subnet-vlan 
vlan vlan-id  

Required 

 

After you configure a command on a Layer 2 aggregate interface, the system starts applying the 

configuration to the aggregate interface and its aggregation member ports. If the system fails to do that 

on the aggregate interface, it stops applying the configuration to the aggregation member ports. If it fails 

to do that on an aggregation member port, it simply skips the port and moves to the next port.  

 

Display VLAN information 

display vlan [ vlan-id1 [ to vlan-id2 ] | all | 
dynamic | interface interface-type 
interface-number.subnumber | reserved 
| static ] 

Available in any view

Display VLAN interface 
information 

 

[ 

]

Available in any view