3com S7906E Instruccion De Instalación
1-74
Troubleshooting MPLS TE
Symptom:
OSPF TE is configured but no TE LSAs can be generated to describe MPLS TE attributes.
Analysis:
For TE LSAs to be generated, at least one OSPF neighbor must reach the FULL state.
Solution:
1) Perform
the
display current-configuration
command to check that MPLS TE is configured on
involved interfaces.
2) Perform
the
debugging ospf mpls-te
command to observe whether OSPF can receive the TE
LINK establishment message.
3) Perform
the
display ospf peer
command to check that OSPF neighbors are established correctly.