3com S7906E Instruccion De Instalación

 

5-8 

Follow these steps to configure SP + WRR queues: 

Enter system view 

system-view 

— 

Enter 
interface view 

interface interface-type 
interface-number 

Enter 
interface 
view or 
port group 
view 

Enter port 
group view 

port-group manual 
port-group-name 

Use either command 

Settings in interface view take effect 
on the current interface; settings in 
port group view take effect on all ports 
in the port group. 

Enable the WRR queue 
scheduling on the port 

Required 

The default queuing algorithm on an 
interface is SP queuing. 

Configure SP queue 
scheduling 

qos wrr queue-id group sp

Required 

Configure WRR queue 
scheduling 

qos wrr queue-id group 
group-id byte-count 
schedule-value 

Required 

 

z 

Configure to adopt SP+WRR queue scheduling algorithm on GigabitEthernet2/0/1.  

z 

Configure queue 0, queue 1, queue 2 and queue 3 on GigabitEthernet2/0/1 to be in SP queue 

scheduling group.  

z 

Configure queue 4, queue 5, queue 6 and queue 7 on GigabitEthernet2/0/1 to be in WRR queue 

scheduling group, with the weight being 2, 4, 6 and 8 respectively.  

# Enter system view.  

<Sysname> system-view 

# Enable the SP+WRR queue scheduling algorithm on GigabitEthernet2/0/1.  

[Sysname] interface GigabitEthernet 2/0/1 

[Sysname-GigabitEthernet2/0/1] qos wrr 

[Sysname-GigabitEthernet2/0/1] qos wrr 0 group sp 

[Sysname-GigabitEthernet2/0/1] qos wrr 1 group sp 

[Sysname-GigabitEthernet2/0/1] qos wrr 2 group sp 

[Sysname-GigabitEthernet2/0/1] qos wrr 3 group sp 

[Sysname-GigabitEthernet2/0/1] qos wrr 4 group 1 weight 2 

[Sysname-GigabitEthernet2/0/1] qos wrr 5 group 1 weight 4 

[Sysname-GigabitEthernet2/0/1] qos wrr 6 group 1 weight 6 

[Sysname-GigabitEthernet2/0/1] qos wrr 7 group 1 weight 8