3com S7906E Instruccion De Instalación

Descargar
Página de 2621
 
To do… 
Use the command… 
Remarks 
Enter system view 
system-view 
— 
Enter ONU port view 
interface interface-type 
interface-number
 
— 
Enable the ONU downlink 
bandwidth allocation 
policy and prioritize 
high-priority packets 
bandwidth downstream policy 
enable 
Required 
By default, the downlink 
bandwidth allocation policy is 
disabled and high-priority 
packets are not prioritized.  
Configure the ONU 
downlink bandwidth limit 
bandwidth downstream 
max-bandwidth value | 
max-burstsize value } * 
Optional 
By default, the maximum 
bandwidth is 999994 kbps, and 
the maximum burst buffer is 
8388480 bytes. 
 
 
The configuration of high-priority packet buffering (as shown in 
and that of the downlink bandwidth limit take effect only when the downlink bandwidth allocation 
policy is enabled. 
The configured downlink bandwidth limitation takes effect only on known unicasts, but not on 
unknown unicasts, multicasts, or broadcasts.  
The sum of the minimum uplink bandwidths configured for all the existing ONU ports under an OLT 
port cannot exceed 921600 Kbps, namely, 900 Mbps.  
 
Configuring QoS at the ONU Side 
Priority mapping on the ONU port 
When the ONU receives packets on an ONU port, it assigns local precedence to the packets according 
to the 802.1p-to-local precedence mapping table. 
  shows the default 802.1p-to-local 
precedence mapping table.  
Table 12-3 Default mapping between CoS precedence values and local precedence values 
CoS precedence 
Local precedence 
0 0 
1 0 
2 1 
3 1 
4 2 
5 2 
6 3 
7 3