3com S7906E Instruccion De Instalación
1-35
To do…
Use the command…
Remarks
Clear buffered stop-accounting
requests that get no responses on
a distributed IRF device
requests that get no responses on
a distributed IRF device
reset stop-accounting-buffer
{ radius-scheme
radius-server-name | session-id
session-id | time-range start-time
stop-time | user-name user-name }
[ chassis chassis-number slot
slot-number ]
{ radius-scheme
radius-server-name | session-id
session-id | time-range start-time
stop-time | user-name user-name }
[ chassis chassis-number slot
slot-number ]
Available in user view
Configuring HWTACACS
Except for deleting HWTACACS schemes and changing the IP addresses of the HWTACACS servers,
you can make any changes to HWTACACS parameters, no matter whether there are users online or
not. This is different from RADIUS.
Creating an HWTACACS scheme
The HWTACACS protocol is configured on a per scheme basis. Before performing other HWTACACS
configurations, follow these steps to create an HWTACACS scheme and enter HWTACACS scheme
view:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Create an HWTACACS
scheme and enter HWTACACS
scheme view
scheme and enter HWTACACS
scheme view
hwtacacs scheme
hwtacacs-scheme-name
hwtacacs-scheme-name
Required
Not defined by default
z
Up to 16 HWTACACS schemes can be configured.
z
A scheme can be deleted only when it is not referenced.
Specifying the HWTACACS Authentication Servers
Follow these steps to specify the HWTACACS authentication servers: