3com S7906E Instruccion De Instalación
1-21
Troubleshooting Port Security
Cannot Set the Port Security Mode
Symptom
Cannot set the port security mode.
[Switch-GigabitEthernet2/0/1] port-security port-mode autolearn
Error:When we change port-mode, we should first change it to noRestrictions, then change
it to the other.
Analysis
For a port working in a port security mode other than noRestrictions, you cannot change the port
security mode by using the port-security port-mode command directly.
Solution
Set the port security mode to noRestrictions first.
[Switch-GigabitEthernet2/0/1] undo port-security port-mode
[Switch-GigabitEthernet2/0/1] port-security port-mode autolearn
Cannot Configure Secure MAC Addresses
Symptom
Cannot configure secure MAC addresses.
[Switch-GigabitEthernet2/0/1] port-security mac-address security 1-1-2 vlan 1
Error: Security MAC address configuration failed.
Analysis
No secure MAC address can be configured on a port operating in a port security mode other than
autoLearn.
Solution
Set the port security mode to autoLearn.
[Switch-GigabitEthernet2/0/1] undo port-security port-mode
[Switch-GigabitEthernet2/0/1] port-security max-mac-count 64
[Switch-GigabitEthernet2/0/1] port-security port-mode autolearn
[Switch-GigabitEthernet2/0/1] port-security mac-address security 1-1-2 vlan 1
Cannot Change Port Security Mode When a User Is Online
Symptom
Port security mode cannot be changed when an 802.1X-authenticated or MAC authenticated user is
online.
[Switch-GigabitEthernet2/0/1] undo port-security port-mode
Error:Cannot configure port-security for there is 802.1X user(s) on line on port
GigabitEthernet2/0/1.