3com S7906E Instruccion De Instalación

 

1-9 

# Configure port GigabitEthernet 2/0/1 as a trunk port, allowing all VLANs to pass through.  

[DeviceA] interface GigabitEthernet 2/0/1 

[DeviceA-GigabitEthernet2/0/1] port link-type trunk 

[DeviceA-GigabitEthernet2/0/1] port trunk permit vlan all 

# Enable GVRP on GigabitEthernet 2/0/1.  

[DeviceA-GigabitEthernet2/0/1] gvrp 

# Set the GVRP registration type to fixed on the port.  

[DeviceA-GigabitEthernet2/0/1] gvrp registration fixed 

[DeviceA-GigabitEthernet2/0/1] quit 

# Create VLAN 2 (a static VLAN). 

[DeviceA] vlan 2 

2)  Configure Device B 

# Enable GVRP globally.  

<DeviceB> system-view 

[DeviceB] gvrp 

# Configure port GigabitEthernet 2/0/1 as a trunk port, allowing all VLANs to pass through.  

[DeviceB] interface GigabitEthernet 2/0/1 

[DeviceB-GigabitEthernet2/0/1] port link-type trunk 

[DeviceB-GigabitEthernet2/0/1] port trunk permit vlan all 

# Enable GVRP on GigabitEthernet 2/0/1.  

[DeviceB-GigabitEthernet2/0/1] gvrp 

[DeviceB-GigabitEthernet2/0/1] quit 

# Create VLAN 3 (a static VLAN). 

[Sysname] vlan 3 

3)  Verify the configuration 

# Display dynamic VLAN information on Device A. 

[DeviceA] display vlan dynamic 

 No dynamic vlans exist! 

# Display dynamic VLAN information on Device B. 

[DeviceB] display vlan dynamic 

 Now, the following dynamic VLAN exist(s): 

  2 

To prevent dynamic VLAN information registration and update among devices, set the GVRP 

registration mode to forbidden on Device A and normal on Device B.