3com S7906E Instruccion De Instalación

Descargar
Página de 2621
 
1-32 
 IPv4 Standby Information: 
     Run Mode       : Standard 
     Run Method     : Virtual MAC 
 Total number of virtual routers : 2 
   Interface Vlan-interface2 
     VRID           : 1                    Adver Timer  : 1 
     Admin Status   : Up                   State        : Backup 
     Config Pri     : 100                  Running Pri  : 100 
     Preempt Mode   : Yes                  Delay Time   : 0 
     Auth Type      : None 
     Virtual IP     : 202.38.160.100 
     Master IP      : 202.38.160.1 
   Interface Vlan-interface3 
     VRID           : 2                    Adver Timer  : 1 
     Admin Status   : Up                   State        : Master 
     Config Pri     : 110                  Running Pri  : 110 
     Preempt Mode   : Yes                  Delay Time   : 0 
     Auth Type      : None 
     Virtual IP     : 202.38.160.200 
     Virtual MAC    : 0000-5e00-0102 
     Master IP      : 202.38.160.131 
The above information indicates that in VRRP group 1 Switch A is the master, Switch B is the backup 
and hosts with the default gateway of 202.38.160.100/25 accesses the Internet through Switch A; in 
VRRP group 2 Switch A is the backup, Switch B is the master and hosts with the default gateway of 
202.38.160.200/25 accesses the Internet through Switch B. 
VRRP Load Balancing Mode Configuration Example 
Network requirements 
Switch A, Switch B, and Switch C belong to VRRP group 1 with the virtual IP address of 
10.1.1.1/24. 
Hosts on network segment 10.1.1.0/24 use 10.1.1.1/24 as their default gateway. Use the VRRP 
group to ensure that when a gateway (Switch A, Switch B, or Switch C) fails, the hosts on the LAN 
can access the external network through another gateway. 
VRRP group 1 works in the load balancing mode to make good use of network resources.