3com S7906E Instruccion De Instalación

 

 

1-22 

 

User(2.2.2.2:(none)):aaa 

331 Give me your password, please 

Password: 

230 Logged in successfully 

[ftp] 

# Download the soft-version2.app programs on the FTP server to the Flash of Device. 

[ftp] binary 

200 Type set to I. 

[ftp] get soft-version2.app 

[ftp] bye 

<Device> 

# Upgrade the Boot ROM file of the active SRPU (resides in slot 0). 

<Device> bootrom update file soft-version2.app slot 0 

# Upgrade the Boot ROM file of the standby SRPU (resides in slot 1). 

<Device> copy soft-version2.app slot1#flash:/soft-version2.app 

<Device> bootrom update file slot1#flash:/soft-version2.app slot 1 

# Specify the application program for the next boot on the active SRPU. 

<Device> boot-loader file soft-version2.app slot 0 main 

# Specify the application program for the next boot on the standby SRPU. 

<Device> copy soft-version2.app slot1#flash:/soft-version2.app 

<Device> boot-loader file slot1#flash:/soft-version2.app slot 1 main 

# Reboot the device. The software version is upgraded now. 

<Device> reboot 

After the device reboots, use the display version command to check if the upgrade is successful. 

z 

As shown in 

, the current software version is soft-version1 for the IRF system. Upgrade 

the software version of the IRF system to soft-version2 and configuration file to new-config. 

z 

The latest application soft-version2.app and the latest configuration file new-config.cfg are both 

saved on the TFTP server. 

z 

The IRF contains two member devices, Master with the member ID of 1 and Slave with the member 

ID of 2. The active SRPU of Master is in slot 0, and the standby SRPU of Master is in slot 1. The 

active SRPU of Slave is in slot 0, and the standby SRPU of Slave is in slot 1. 

z 

The IP address of the IRF system is 1.1.1.1/24, the IP address of the TFTP server is 2.2.2.2/24, 

and the TFTP server is reachable.