3com S7906E Instruccion De Instalación

 

1-23 

Configure the NQA probe 
timeout time 

probe timeout timeout 

Optional 

By default, the timeout time is 
3000 milliseconds. 

This parameter is not available 
for a UDP jitter test. 

Configure the maximum 
number of hops a probe packet 
traverses in the network 

ttl value 

Optional 

20 by default. 

This parameter is not available 
for a DHCP test. 

Configure the ToS field in an IP 
packet header in an NQA probe 
packet 

tos value 

Optional 

0 by default. 

This parameter is not available 
for a DHCP test. 

Enable the routing table bypass 
function 

Optional 

Disabled by default. 

This parameter is not available 
for a DHCP test. 

 

Scheduling an NQA Test Group 

With this configuration, you can set the start time and test duration for a test group to perform NQA tests. 

The start time can take a specific value or can be now, which indicates that a test is started immediately; 

the test duration can take a specific value or can be forever, which indicates that a test will not stop until 

you use the undo nqa schedule command to stop the test. 

A test group performs tests when the system time is between the start time and the end time (the start 

time plus test duration). If the system time is behind the start time when you execute the nqa schedule 

command, a test is started when the system time reaches the start time; if the system time is between 

the start time and the end time, a test is started at once; if the system time is ahead of the end time, no 

test is started. You can use the display clock command to view the current system time. 

Configuration prerequisites 

Before scheduling an NQA test group, make sure: 

z 

Required test parameters corresponding to a test type have been configured; 

z 

For the test which needs the cooperation with the NQA server, configuration on the NQA server 

has been completed. 

Scheduling an NQA test group 

Follow these steps to schedule an NQA test group: 

Enter system view 

system-view 

— 

Schedule an NQA test group 

nqa schedule admin-name operation-tag 
start-time { hh:mm:ss [ yyyy/mm/dd ] | 
now } lifetime { lifetime | forever } 

Required