3com S7906E Instruccion De Instalación

 

1-35 

[DeviceA-nqa-admin-test-tcp] destination port 9000 

# Enable the saving of history records. 

[DeviceA-nqa-admin-test-tcp] history-record enable 

[DeviceA-nqa-admin-test-tcp] quit 

# Enable TCP test. 

[DeviceA] nqa schedule admin test start-time now lifetime forever 

# Disable TCP test after the test begins for a period of time. 

[DeviceA] undo nqa schedule admin test 

# Display results of the last TCP test. 

[DeviceA] display nqa result admin test 

  NQA entry(admin admin, tag test) test results: 

    Destination IP address: 10.2.2.2 

      Send operation times: 1              Receive response times: 1 

      Min/Max/Average round trip time: 13/13/13 

      Square-Sum of round trip time: 169 

      Last succeeded probe time: 2007-11-22 10:27:25.1 

    Extended results: 

      Packet lost in test: 0% 

      Failures due to timeout: 0 

      Failures due to disconnect: 0 

      Failures due to no connection: 0 

      Failures due to sequence error: 0 

      Failures due to internal error: 0 

      Failures due to other errors: 0 

      Packet(s) arrived late: 0 

# Display the history of TCP tests. 

[DeviceA] display nqa history admin test 

  NQA entry(admin admin, tag test) history record(s): 

Index      Response     Status           Time 

    1          13           Succeeded        2007-11-22 10:27:25.1 

UDP Echo Test Configuration Example 

Network requirements 

Use the NQA UDP echo function to test the round trip time between Device A and Device B. The port 

number is 8000. 

Figure 1-11 Network diagram for the UDP echo tests