3com S7906E Instruccion De Instalación

 

1-6 

Follow these steps to enable the ACFP server: 

Enter system view 

system-view 

— 

Enable the ACFP server 

acfp server enable 

Required 

Disabled by default 

 

To make ACFP work normally, you must enable the device to send traps of the ACFP module. 

After the trap function on the ACFP module is enabled, the ACFP module will generate traps to report 

important events of the module. The levels of the ACFP traps are described in 

. 

Table 1-1 ACFP trap message level 

Context ID type changed 

notifications 

ACFP client registration 

notifications 

ACFP client deregistration notifications 

ACSEI detects that ACFP client had no response 

warnings 

ACFP server does not support the working mode of the ACFP 
client 

errors 

Expiration period of ACFP collaboration policy changed 

notifications 

ACFP collaboration rules are created 

informational 

ACFP collaboration rules are removed 

informational 

ACFP collaboration rules failed 

errors 

Expiration period of ACFP collaboration policy timed out 

notifications 

 

The generated traps will be sent to the information center of the device. With the parameters for the 

information center set, the output rules for traps (that is, whether the traps are allowed to be output and 

the output destinations) are decided. For the configuration of the parameters for the information center, 

refer to Information Center Configuration in the System Volume. 

Follow these steps to enable the ACFP trap function: 

Enter system view 

system-view 

— 

Enable the trap function of the 
ACFP module 

snmp-agent trap enable acfp 
[ client | policy | rule | server ]

Optional 

Enabled by default