3com S7906E Instruccion De Instalación

 

6-3 

 

The priority configured for an OLT port (with the qos priority priority-value command) takes effect 
only when QinQ is enabled on the OLT port.  

 

After MAC authentication is enabled on an OLT port, the port directly discards the unicast packets 
that fail to pass the authentication, while the corresponding multicast table entries can be created 
on the device for multicast packets regardless of whether the multicast packets pass the 
authentication.  

 

This section discusses the ONU port configurations with an S7900E switch working as an OLT device. 
The actual configurations depend on whether the ONUs attached to the OLT ports support the features. 
Assume UNI port mirroring can be configured in port view of ONU 3/0/1:1. This configuration, however, 
will not take effect if the ONUs attached to ONU 3/0/1:1 do not support port mirroring.  

ONU port features 

Basic parameters 

 

Configuring an ONU port 
description string 

 

Enabling/disabling an ONU 
port 

 

Configuring port up/down 
state suppression timers 

 

Displaying and clearing port 
statistics information 

Port-related configuration 

Loopback test 

Configuring ONU port loopback 
test function 

Port-related configuration 

Port link type 

Configuring the link type and 
default VLAN ID for an ONU 
port 

VLAN configuration 

Port trap 

Configuring ONU port trap 

SNMP-RMON configuration 

MAC address table 
management 

 

Adding or modifying MAC 
address entries on specific 
ONU ports 

 

Configuring the maximum 
number of MAC addresses 
that can be learned on an 
ONU port 

MAC address table 
management configuration