3com S7906E Instruccion De Instalación

 

1-18 

<SwitchB> system-view 

[SwitchB] ipv6 

# Configure an IPv4 address for VLAN-interface 100. 

[SwitchB] interface vlan-interface 100 

[SwitchB-Vlan-interface100] ip address 5.1.1.1 24 

[SwitchB-Vlan-interface100] quit 

# Configure an IPv6 address for VLAN-interface 101. 

[SwitchB] interface vlan-interface 101 

[SwitchB-Vlan-interface101] ipv6 address 2002:0501:0101:1::1/64 

[SwitchB-Vlan-interface101] quit 

# Configure the 6to4 tunnel. 

[SwitchB] interface tunnel 0 

[SwitchB-Tunnel0] ipv6 address 2002:0501:0101::1/64 

[SwitchB-Tunnel0] source vlan-interface 100 

[SwitchB-Tunnel0] tunnel-protocol ipv6-ipv4 6to4 

[SwitchB-Tunnel0] quit 

# Create service loopback group 1 to support the tunnel service. 

[SwitchB] service-loopback group 1 type tunnel 

# Add GigabitEthernet 2/0/3 to service loopback group 1. 

[SwitchB] interface GigabitEthernet 2/0/3 

[SwitchB-GigabitEthernet2/0/3] undo stp enable 

[SwitchB-GigabitEthernet2/0/3] port service-loopback group 1 

[SwitchB-GigabitEthernet2/0/3] quit 

# Reference service loopback group 1 on the tunnel. 

[SwitchB] interface tunnel 0 

[SwitchB-Tunnel0] service-loopback-group 1 

[SwitchB-Tunnel0] quit 

# Configure a static route whose destination address is 2002::/16 and the next hop is the tunnel 

interface. 

[SwitchB] ipv6 route-static 2002:: 16 tunnel 0 

After the above configuration, ping Host B from Host A or ping Host A from Host B. 

D:\>ping6 -s 2002:201:101:1::2 2002:501:101:1::2 

 

Pinging 2002:501:101:1::2 

from 2002:201:101:1::2 with 32 bytes of data: 

 

Reply from 2002:501:101:1::2: bytes=32 time=13ms 

Reply from 2002:501:101:1::2: bytes=32 time=1ms 

Reply from 2002:501:101:1::2: bytes=32 time=1ms 

Reply from 2002:501:101:1::2: bytes=32 time<1ms 

 

Ping statistics for 2002:501:101:1::2: