Manualsbrain.com
  1. Manuales
  2. Marcas
  3. 3com
  4. S7906E
  5. Instruccion De Instalación

3com S7906E Instruccion De Instalación

Descargar
Página de 2621
 
1-32 
Last clearing of counters:  Never 
    Last 300 seconds input:  0 bytes/sec, 0 packets/sec 
    Last 300 seconds output:  0 bytes/sec, 0 packets/sec 
    152 packets input,  9728 bytes 
    0 input error 
    168 packets output,  10752 bytes 
    0 output error 
 
<SwitchB> display interface tunnel 2 
Tunnel2 current state: UP 
Line protocol current state: UP 
Description: Tunnel2 Interface 
The Maximum Transmit Unit is 1460 
Internet Address is 30.1.2.2/24 Primary 
Encapsulation is TUNNEL, service-loopback-group ID is 1. 
Tunnel source 2002::2:1, destination 2002::1:1 
Tunnel protocol/transport IP/IPv6 
Last clearing of counters:  Never 
    Last 300 seconds input:  1 bytes/sec, 0 packets/sec 
    Last 300 seconds output:  1 bytes/sec, 0 packets/sec 
    167 packets input,  10688 bytes 
    0 input error 
    170 packets output,  10880 bytes 
    0 output error 
# Ping the IPv4 address of the peer interface VLAN-interface 100 from Switch A. 
[SwitchA] ping 30.1.3.1 
  PING 30.1.3.1: 56  data bytes, press CTRL_C to break 
    Reply from 30.1.3.1: bytes=56 Sequence=1 ttl=255 time=46 ms 
    Reply from 30.1.3.1: bytes=56 Sequence=2 ttl=255 time=15 ms 
    Reply from 30.1.3.1: bytes=56 Sequence=3 ttl=255 time=16 ms 
    Reply from 30.1.3.1: bytes=56 Sequence=4 ttl=255 time=15 ms 
    Reply from 30.1.3.1: bytes=56 Sequence=5 ttl=255 time=16 ms 
 
  --- 30.1.3.1 ping statistics --- 
    5 packet(s) transmitted 
    5 packet(s) received 
    0.00% packet loss 
    round-trip min/avg/max = 15/21/46 ms 
Configuring an IPv6 over IPv6 Tunnel 
 
 
EB boards and SD boards support only the IPv6 over IPv6 Tunnel.