3com S7906E Instruccion De Instalación

 

1-14 

 

This feature is supported on the internal 10GE ports. 

 

When configuring an OAA application, to ensure the normal communication between the device and the 

OAP card, you need to set the connection mode of the 10 GE ports connecting the device and the card 

to extended. 

Follow these steps to configure the working mode of an Ethernet port: 

Enter system view 

— 

Enter 10 GE port view 

interface interface-type 
interface-number 

— 

Set the connection mode of the 
10 GE port 

port connection-mode 
{ extend | normal } 

Required 

Then connection mode of a 10 
GE port is normal by default. 

 

Display the current state of a 
port and the related information 

display interface 
[ interface-type 
[ interface-number ] ] 

Available in any view 

Display the summary of a port 

display brief interface 
[ interface-type 
[ interface-number ] ] [ | { begin 
| exclude | include } 
regular-expression ] 

Available in any view 

Display information about 
discarded packets on a port 

display packet-drop interface 
[ interface-type 
[ interface-number ] ] 

Available in any view 

Display summary information 
about discarded packets on all 
ports 

Available in any view 

Clear the statistics of a port 

reset counters interface 
[ interface-type 
[ interface-number ] ] 

Available in user view 

Clear the statistics of discarded 
packets on a port 

reset packet-drop interface 
[ interface-type 
[ interface-number ] ] 

Available in user view 

Display the Combo ports and 
the corresponding 
optical/electrical ports 

display port combo 

Available in any view