Manualsbrain.com
  1. Manuales
  2. Marcas
  3. 3com
  4. S7906E
  5. Instruccion De Instalación

3com S7906E Instruccion De Instalación

Descargar
Página de 2621
 
1-11 
<SwitchA> display ip routing-table protocol static 
Public Routing Table : Static 
Summary Count : 1 
 
Static Routing table Status : < Active> 
Summary Count : 1 
Destination/Mask    Proto  Pre  Cost         NextHop         Interface 
14.1.1.0/24         Static 60   0            12.1.1.2        Vlan12 
 
Static Routing table Status : < Inactive> 
Summary Count : 0 
# Enable BFD debugging on Switch A. 
<SwitchA> debugging bfd event 
<SwitchA> debugging bfd scm 
<SwitchA> terminal debugging 
# When the link between Switch A and Layer 2 switch fails, Switch A can detect the failure. 
%Jul 27 10:18:18:672 2007 SwitchA BFD/4/LOG:Sess[12.1.1.1/12.1.1.2, Vlan12,Ctrl], 
 Sta: UP->DOWN, Diag: 1 
*Jul 27 10:18:18:672 2007 SwitchA BFD/7/EVENT:Send sess-down Msg, [Src:12.1.1.1, 
Dst:12.1.1.2, Vlan12,Ctrl], instance:0, protocol:STATIC 
*Jul 27 10:18:19:172 2007 SwitchA BFD/7/EVENT:Receive Delete-sess, [Src:12.1.1.1 
,Dst:12.1.1.2, Vlan12,Ctrl], Direct, Instance:0x0, Proto:STATIC 
*Jul 27 10:18:19:172 2007 SwitchA BFD/7/EVENT:Notify driver to stop receiving bf 
# Display the static route information on Switch A.  You can see that the static route is inactive.  
<SwitchA> display ip routing-table protocol static 
Public Routing Table : Static 
Summary Count : 1 
 
Static Routing table Status : < Active> 
Summary Count : 0 
 
Static Routing table Status : < Inactive> 
Summary Count : 1 
Destination/Mask    Proto  Pre  Cost         NextHop         Interface 
14.1.1.0/24         Static 60   0            12.1.1.2        Vlan12