3com S7906E Instruccion De Instalación

 

1-5 

z 

To improve stability and reliability, you can specify a loopback interface as the source interface for 

establishing TCP connections to a BGP peer. By doing so, a connection failure upon redundancy 

availability will not affect TCP connection establishment.  

z 

To establish a BGP connection, you need to specify on the local router the source interface for 

establishing the TCP connection to the peer on the peering BGP router; otherwise, the local BGP 

router may fail to establish TCP connection to the peer when using the outbound interface of the 

best route as the source interface. 

 

Follow these steps to allow the establishment of eBGP connection to a non-directly connected 

peer/peer group: 

Enter system view 

— 

Enter BGP view 

bgp as-number 

— 

Enter IPv6 address family view 

— 

Allow the establishment of eBGP 
connection to a non directly connected 
peer/peer group 

peer { ipv6-group-name | 
ipv6-address } 
ebgp-max-hop [ hop-count ]

Required 

Not configured by 
default. 

 

In general, direct links should be available between eBGP peers. If not, you can use the peer 

ebgp-max-hop command to establish a multi-hop TCP connection in between. However, you need not 

use this command for direct eBGP connections with loopback interfaces. 

 

Follow these steps to configure description for an IPv6 peer/peer group: 

Enter system view 

— 

Enter BGP view 

bgp as-number 

— 

Enter IPv6 address family view 

— 

Configure a description for an 
IPv6 peer/peer group 

peer { ipv6-group-name | 
ipv6-address } description 
description-text 

Optional 

Not configured by default.