3com S7906E Instruccion De Instalación

 

1-21 

Clear dampened IPv6 BGP routing 
information and release suppressed 
routes 

reset bgp ipv6 dampening [ ipv6-address 
prefix-length ] 

Clear IPv6 BGP route flap 
information 

reset bgp ipv6 flap-info 
[ ipv6-address/prefix-length | as-path-acl 
as-path-acl-number | regexp 
as-path-regexp ] 

Available in 
user view 

 

 

Some examples for IPv6 BGP configuration are similar to those of BGP4, so refer to BGP Configuration 

in the IP Routing Volume for related information. 

 

In the following figure are all IPv6 BGP switches. Between Switch A and Switch B is an eBGP 

connection. Switch B, Switch C and Switch D are fully meshed through iBGP connections. 

Figure 1-1 IPv6 BGP basic configuration network diagram 

 

 

1)  Configure IPv6 addresses for interfaces (omitted) 

2)   Configure iBGP connections 

# Configure Switch B. 

<SwitchB> system-view 

[SwitchB] ipv6 

[SwitchB] bgp 65009