3com S7906E Instruccion De Instalación

 

1-8 

Match BGP routing information whose 
community attribute is specified in the 
community list(s) 

if-match community 
{ basic-community-list-number 
[ whole-match ] | 
adv-community-list-number }&<1-
16> 

Optional 

Not configured by 
default. 

Match routes having the specified cost 

if-match cost value 

Optional 

Not configured by 
default. 

Match BGP routing information whose 
extended community attribute is specified 
in the extended community list(s) 

if-match extcommunity 
ext-comm-list-number&<1-16> 

Optional 

Not configured by 
default. 

Match routing information having specified 
outbound interface(s) 

if-match interface 
{ interface-type 
interface-number }&<1-16> 

Optional 

Not configured by 
default. 

Match routing information having MPLS 
labels 

Optional 

Not configured by 
default. 

Match routing information having the 
specified route type 

if-match route-type 
{ external-type1 | external-type2 
| external-type1or2 | 
is-is-level-1 | is-is-level-2 | 
internal | nssa-external-type1 | 
nssa-external-type2 | 
nssa-external-type1or2 } * 

Optional 

Not configured by 
default. 

Match RIP, OSPF, and IS-IS routing 
information having the specified tag value

if-match tag value 

Optional 

Not configured by 
default. 

 

z 

The  if-match clauses of a route policy node are in logic AND relationship, namely, routing 

information has to satisfy all its if-match clauses before being executed with its apply clauses. 

z 

You can specify no or multiple if-match clauses for a route policy node. If no if-match clause is 

specified, and the route policy node is in permit mode, all routing information can pass the node. If 

it is in deny mode, no routing information can pass it. 

z 

An ACL specified in an if-match clause should be a non-VPN ACL. 

z 

The if-match commands for matching IPv4 destination, next hop and source address are different 

from those for matching IPv6 ones. 

z 

BGP does not support criteria for matching against outbound interfaces of routing information.  

 

Follow these steps to define apply clauses for a route policy: