3com S7906E Instruccion De Instalación
1-22
Multicast Data Fails to Reach Receivers
Symptom
The multicast data can reach some routers but fails to reach the last hop router.
Analysis
If a multicast forwarding boundary has been configured through the multicast boundary command,
any multicast packet will be kept from crossing the boundary.
Solution
1) Use
the
display pim routing-table command to check whether the corresponding (S, G) entries
exist on the router. If so, the router has received the multicast data; otherwise, the router has not
received the data.
2) Use
the
display multicast boundary command to view the multicast boundary information on the
interfaces. Use the multicast boundary command to change the multicast forwarding boundary
setting.
3) In the case of PIM-SM, use the display current-configuration command to check the BSR and
RP information.