3com S7906E Guía De Referencia

 

1-5 

patch run patch-number [ slave | slot slot-number ] 

System view 

3: Manage level 

patch-number: Sequence number of a patch. The valid values of this argument depend on the patch file 

used. 

slave: Specifies the standby main board.  

slot slot-number: Specifies a board by its slot number. The value range of this argument varies with the 

device model. 

Use the patch run command to confirm the running of the specified patch and all the ACTIVE patches 

before the specified patch number.  

This operation is applicable to patches in the ACTIVE state only.  

If the running of a patch is confirmed, after the system reboots, the original ACTIVE patches are still 

ACTIVE and take effect. 

If you execute this command without specifying slave or slot-number, the command confirms the 

running of the specified patch(es) on the active main board. 

# Confirm the running of patch 3 and all the ACTIVE patches before patch 3 on board 5. 

<Sysname> system-view 

[Sysname] patch run 3 slot 5