3com S7906E Guía De Instalación Rápida

 

6-16 

The following gives an example to describe the entire procedure for upgrading the Boot ROM program 

and host software of an S7902E switch (installed with dual SRPUs). The upgrading procedure applies 

to all S7900E series switches. 

Assume that 

z 

The host software package for upgrade is S7902E002.app. 

z 

The host software package the system currently runs is S7902E001.app. 

z 

Slot 0 is for the active SRPU. 

z 

Slot 1 is for the standby SRPU. 

z 

Slot 3 is for an LPU. 

Run the FTP Server on the local PC (assume its IP address is 10.10.110.1). Ensure that you have 

configured the username and password and set the correct file directory. 

Log into the switch through Telnet or the console port and download the host software package to the 

switch by using FTP.  

1)  Download the software to the switch using FTP. 

<3Com> ftp 10.10.110.1 

Trying ...                                                                

Press CTRL+K to abort                                                   

Connected.                                                                

220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user 

User(none):lyt                                                            

331 Give me your password, please                                     

Password:                                                                 

230 Logged in successfully        

[ftp] binary 

[ftp] get S7902E002.app 

[ftp] bye 

2)  Upgrade the Boot ROM program. 

Skip this step if unnecessary. 

 

If you want to upgrade Boot ROM on both the SRPUs and the LPU, you are recommended to upgrade 

the Boot ROM program on the LPU and SRPUs in turn. 

 

z 

Upgrade the Boot ROM program of the LPU. 

<3Com> bootrom update file flash:/ S7902E002.app slot 3 

This command will update bootrom file on the specified board(s), Continue? [Y/N]:y