3com 3031 Instruccion De Instalación
1050
C
HAPTER
76: DCC C
ONFIGURATION
Configuring PPP callback in the Resource-Shared DCC implementation
Configure the PPP callback client in the Resource-Shared DCC
implementation As a callback client, a router can originate calls to the remote
end (which can be a router or Windows NT server having the PPP callback server
function), and receive the return calls from the remote end.
implementation As a callback client, a router can originate calls to the remote
end (which can be a router or Windows NT server having the PPP callback server
function), and receive the return calls from the remote end.
When Resource-Shared DCC are used to implement PPP callback, the PPP
authentication configuration at client end is the same as that of Circular DCC,
except that the client in Resource-Shared DCC implementation must use the dialer
number command to configure a dial number. Refer to the section “Configuring
PPP callback in the Circular DCC implementation”.
authentication configuration at client end is the same as that of Circular DCC,
except that the client in Resource-Shared DCC implementation must use the dialer
number command to configure a dial number. Refer to the section “Configuring
PPP callback in the Circular DCC implementation”.
Perform the following configuration in dialer interface view.
By default, the system does not enable callback function and is not configured
with any Windows NT server callback dial number.
with any Windows NT server callback dial number.
Configure the PPP callback server in the Resource-Shared DCC
implementation When Resource-Shared DCC are adopted to implement PPP
callback, the PPP authentication configuration at server end is the same as that of
Circular DCC, except that the server in the Resource-Shared DCC implementation
can only originate a return call according to the dial number configured in the
implementation When Resource-Shared DCC are adopted to implement PPP
callback, the PPP authentication configuration at server end is the same as that of
Circular DCC, except that the server in the Resource-Shared DCC implementation
can only originate a return call according to the dial number configured in the
service-type ppp
command. Refer to the section “Configuring PPP callback in
Use the
local-user callback-number
command to configure the callback user
and callback dial number in system view, and perform other configurations in
dialer interface view.
dialer interface view.
Table 1127 Implementing PPP callback (client configuration) in Resource-Shared DCC
Operation
Command
Configure the local end to be the PPP
callback client
callback client
ppp callback client
Disable the local end to be the PPP callback
client
client
undo ppp callback client
Configure the dialer number for calling a
remote end
remote end
dialer number dial-number
Configure the dial number for a Windows
NT server to originate return calls to the
router
NT server to originate return calls to the
router
ppp callback ntstring dial-number
Delete the dial number that a Windows NT
server needs for placing return calls to the
router
server needs for placing return calls to the
router
undo ppp callback ntstring
Table 1128 Implementing PPP callback (server configuration) in Resource-Shared DCC
Operation
Command
Configure the callback user and
callback number
callback number
local-user username callback-number
telephone-number
Configure the local end to be the
PPP callback server
PPP callback server
ppp callback server
Disable the local end to be the PPP
callback server
callback server
undo ppp callback server
Configure the PPP callback reference
dialer callback-center dial-number