3com 3031 Instruccion De Instalación
Displaying User Information
77
■
level
indicates the priority of the user, ranging from 0 to 3. 0 indicates the
lowest level and 3 the highest. The default priority is 3 after the user
configuration.
configuration.
In the case of non-authentication or password authentication, it is the priority of
the user interface that determines which priority of commands the user who logs
on the system can access. If the username and password are needed in the
configuration, such as
the user interface that determines which priority of commands the user who logs
on the system can access. If the username and password are needed in the
configuration, such as
local
(AAA local authentication), it is the priority of the
user that determines which priority of commands the user who logs on the system
can access.
can access.
Displaying User
Information
Information
Using the following command, you can view the information of the configured
user, local user and on-line user.
user, local user and on-line user.
Perform the following configuration in any view.
Typical Example of
User Management
User Management
This section provides and example of user and password authentication.
Performing Password
Authentication
The user need enter the password 3Com when logging on the system from the
VTY 0 by password authentication. The operation commands are shown as
follows:
VTY 0 by password authentication. The operation commands are shown as
follows:
<3Com>system-view
[3Com]user-interface vty 0
[3Com-ui-vty0]authentication-mode password
[3Com-ui-vty0]set authentication password simple 3Com
Performing User
Authentication Using
the Local User Database
The user need enter the configured username v2 and password 3Com when
logging on the system from the VTY 0. The operation commands are shown as
follows:
logging on the system from the VTY 0. The operation commands are shown as
follows:
<3Com>system-view
[3Com]user-interface vty 0
[3Com-ui-vty0]authentication-mode local
[3Com-ui-vty0]quit
[3Com]local-user v2 password simple 3Com
Table 78 Displaying user information
Operation
Command
Display the information of all users
display users [ all ]
Display the information of local user
display local-user
Display the information of on-line user
display aaa user