3com 3031 Instruccion De Instalación

SNMP configuration includes:

■

Set the SNMP Agent service

■

Set the corresponding versions of SNMP

■

Set community name

■

Set a SNMP group

■

Set a SNMP user

■

Set sysContact

■

Set sending Trap

■

Set the engine ID of a local device

■

Set the address of the Trap destination host

■

Set sysLocation

■

Set the source address for sending Traps

■

Set a view

■

Set packet queue length of Trap sent to destination host

■

Set the saving time of Trap packets

■

Set the maximum size of SNMP packets that an agent can receive or send

This configuration is used to enable the SNMP Agent service, which is disabled by 
default.

Perform the following in the System View.

This configuration is used to enable the corresponding version of SNMP and the 
SNMP V3 is enabled by default. Therefore the command needs to be configured to 
enable SNMP V1 and SNMP V2C.

Perform the following in the System View.

"*" indicates to select several versions from 

v1

, 

v2c 

and 

v3

, with one at least and 

all three at most.

Table 95   Setting the SNMP Agent service

Enable the SNMP Agent service

Disable the SNMP Agent service

Table 96   Setting the corresponding version of SNMP

Enable the corresponding version 
of SNMP

Disable the corresponding version 
of SNMP