3com 3031 Instruccion De Instalación

Contrary to activation, deactivation will disable the connection between the office 
and remote device. If the router finds that the line performance deteriorates, it will 
deactivate the line, re-train and re-activate. The preferred activation time is 30 
seconds.

Figure 32   Networking topology commonly adopted for an ADSL router

This section mainly introduces physical configurations of ADSL interface. For 
configuration details of ATM services (including the configuration of PVC), refer to 
Chapter 25 “ATM Configuration”.

Perform the following tasks to configure the physical parameters of ADSL 
interface.

■

Enter the specified ATM interface view

■

Activate/Deactivate the interface

■

Set the ADSL interface standard

Perform the following in the System View.

You can use the 

 command to activate an ADSL interface and the 

 command to deactivate the interface.

You can manually activate/deactivate an ADSL line by using this command for the 
purpose of line test and troubleshooting.

Perform the following configuration in ATM interface view.

ADSL Router

Splitter

PC

Serv er

Phone-set

Hub

PC

DSL

DSL

Line

To 

ex ternal line

Phone

Ethenet

ADSL Router

Splitter

PC

Serv er

Phone-set

Hub

PC

DSL

DSL

Line

To 

ex ternal line

Phone

Ethenet

Table 237   Entering the specified ATM interface view

Enter the view of a specified ATM interface

Return to the system view

Table 238   Activating/Deactivating the ADSL interface