3com 3031 Instruccion De Instalación

C

HAPTER

 24: F

RAME

 R

ELAY

 C

ONFIGURATION

Perform the following configuration in MFR interface view.

By default, the fragmentation of MFR bundle is disabled.

The size of MFR sliding window refers to the number of fragments that can be 
held by the window with sliding window algorithm when MFR reassembles 
received fragments.

Perform the following configuration in MFR interface view.

By default, the size of MFR sliding window is equal to the number of physical 
interfaces bundled by MFR.

Perform the following configuration in MFR interface view or frame relay interface 
view. 

By default, the maximum fragment is of 300 bytes.

After the fragment function is enabled on MFR interface, the bundle link first uses 
the fragment size configured in frame relay interface view. If there is no 
configuration in frame relay interface view, use fragment size configured in MFR 
interface view.

Configure the interface to use MFR as the link layer protocol and the interface can 
be bundled on the specified MFR interface to form a bundle link.

Perform the following configuration in Interface View.

By default, the interface does not bundle with any MFR interface.

Table 324   Configuring MFR fragmentation

Enable MFR fragmentation

Disable MFR fragmentation

Table 325   Configuring size of MFR sliding window

Set size of MFR sliding window

Restore the default setting

Table 326   Configuring fragment size of MFR bundle link

Set the maximum fragment permitted by bundle link

Restore the default setting

Table 327   Adding MFR bundle link

Bundle the current interface onto the 
specified MFR interface