3com 3031 Instruccion De Instalación
![3com](https://files.manualsbrain.com/attachments/960452ff43b9899cbcffced60c87abf956e7967a/common/fit/150/50/f6ac125d7af2cf40fec58935fa6d4bf71457a57efe50bee91208a434f325/brand_logo.jpeg)
LAPB Troubleshooting
331
[3Com]local-user pad1 service-type pad
b Select LINE
[3Com]user-interface vty 0 4
c Configure authentication mode
[3Com-ui-vty0-4]authentication-mode local
d Enable x25 switching
[3Com]x25 switching
e Configure local x25 switching
[3Com]x25 switch svc 2 interface serial 0/0/0
f
Select interface.
[3Com]interface serial 0/0/0
g Set the link layer protocol of the interface as X.25, and specify it to work in DTE
mode.
[3Com-Serial0/0/0]link-protocol x25 dte
h Specify X.121 address of this interface.
[3Com-Serial0/0/0]x25 x121-address 1
2 Configure RouterB:
a Add PAD user
[3Com]local-user pad2 password simple pad2
[3Com]local-user pad2 service-type pad
b Select LINE
[3Com]user-interface vty 0 4
c Configure authentication mode
[3Com-ui-vty0-4]authentication-mode local
d Enable x25 switching
[3Com]x25 switching
e Configure local x25 switching
[3Com]x25 switch svc 1 interface serial 1/0/0
f
Select interface.
[3Com]interface serial 1/0/0
g Set the link layer protocol of the interface as X.25, and specify it to work in
DCE mode.
[3Com-Serial1/0/0]link-protocol x25 dce
h Specify X.121 address of this interface.
[3Com-Serial1/0/0]x25 x121-address 2
LAPB Troubleshooting
Fault 1: the link layer protocol of two connected sides is LAPB (or X.25), which is
always disconnected.
always disconnected.