3com 3031 Instruccion De Instalación
Configuring IP Address
361
Because the borrowing interface has no IP address of its own, and can not route,
two static routes need to be configured manually to connect routers together.
Refer to the configuration examples for the specific configuration procedure.
two static routes need to be configured manually to connect routers together.
Refer to the configuration examples for the specific configuration procedure.
IP Address Unnumbered configuration task list
The configuration of IP Address Unnumbered can be performed in the interface
view. Serial interfaces encapsulated with PPP, HDLC, Frame Relay and Tunnel can
borrow the IP addresses of the Ethernet interface and other kinds of interfaces.
view. Serial interfaces encapsulated with PPP, HDLC, Frame Relay and Tunnel can
borrow the IP addresses of the Ethernet interface and other kinds of interfaces.
IP Address Unnumbered configuration includes:
■
Activating/deactivating IP Address Unnumbered
■
Monitoring and maintenance of IP Address Unnumbered
Activating/deactivating IP Address Unnumbered
Perform the following task in the interface view to activate/deactivate IP Address
Unnumbered.
Unnumbered.
Displaying and
Debugging IP Address
After the above configuration, execute display command in all views to display the
running of the IP Address, and to verify the effect of the configuration.
running of the IP Address, and to verify the effect of the configuration.
Displaying and
Debugging IP Address
Unnumbered
After the above configuration, execute display command in all views to display the
running of the IP Address Unnumbered, and to verify the effect of the
configuration.
running of the IP Address Unnumbered, and to verify the effect of the
configuration.
IP Address Configuration
Example
Networking requirements
To configure IP addresses for a router's serial interface, it is required that the
master IP address is 129.2.2.1, and the slave IP address is 129.1.3.1.
master IP address is 129.2.2.1, and the slave IP address is 129.1.3.1.
Table 407 Configuring IP Address Unnumbered
Operation
Command
Activate IP Address Unnumbered
ip address unnumbered { interface
interface-type interface-number |
interface-name }
interface-type interface-number |
interface-name }
Deactivate IP Address Unnumbered
undo ip address unnumbered
Table 408 Displaying and debugging IP address
Operation
Command
Display the configuration
status of all interfaces
status of all interfaces
display ip interface [ interface-type
interface-number | interface-name ]
interface-number | interface-name ]
Table 409 Displaying and debugging IP Address Unnumbered
Operation
Command
Display information of IP Address
Unnumbered
Unnumbered
display interface [ interface-type
[ interface-number ] |
interface-name ]
[ interface-number ] |
interface-name ]
Display the information of configuration that
in now running
in now running
display current-configuration