3com 3031 Instruccion De Instalación
Configuring DHCP Server
381
Defining NetBIOS Node
Type for DHCP Client
Mapping must be established between the host name and IP address when DHCP
client uses NetBIOS protocol for communications over Wide Area Network (WAN).
In terms of mapping establishment mode, NetBIOS node can be divided as
client uses NetBIOS protocol for communications over Wide Area Network (WAN).
In terms of mapping establishment mode, NetBIOS node can be divided as
■
b-node:
b
here stands for broadcast, that is, the node gets mapping through
broadcast.
■
p-node:
p
here stands for peer-to-peer. The node gets mapping by
communicating with the NetBIOS server.
■
m-node:
m
here stands for mixed. It is the p-node embraces part of the
broadcast attributes.
■
h-node:
h
here stands for hybrid. It is b-node for which peer-to-peer
communication is available.
Perform the following in the DHCP Address Pool View to configure DHCP address
pool.
pool.
Perform the following in the Interface View to configure interface DHCP address
pool.
pool.
Perform the following in the Interface View to configure multiple interface DHCP
address pools.
address pools.
By default, h-node is configured for DHCP client.
Configuring DHCP
Customization Items
With further development of DHCP technology, new optional configuration items
may arise. Then you can add in custom way these items into DHCP server attribute
table.
may arise. Then you can add in custom way these items into DHCP server attribute
table.
Table 435 Defining NetBIOS node type in global DHCP address pool
Operation
Command
Defines NetBIOS node type for DHCP client
netbios-type { b-node | h-node |
m-node | p-node }
m-node | p-node }
Resets NetBIOS node type to the default value
undo netbios-type
Table 436 Defining NetBIOS node type in interface DHCP address pool
Operation
Command
Defines NetBIOS node type for DHCP
client
client
dhcp server netbios-type { b-node |
h-node | m-node | p-node }
h-node | m-node | p-node }
Resets NetBIOS node type to the
default value
default value
undo dhcp server netbios-type
Table 437 Defining NetBIOS node type in multiple interface DHCP address pools
Operation
Command
Defines NetBIOS node type
for DHCP client
for DHCP client
dhcp server netbios-type { b-node | h-node |
m-node | p-node } { interface
ethernet-subinterface-range | all }
m-node | p-node } { interface
ethernet-subinterface-range | all }
Resets NetBIOS node type to
the default value
the default value
undo dhcp server netbios-type { interface
ethernet-subinterface-range | all }
ethernet-subinterface-range | all }