3com 3031 Instruccion De Instalación
DLSw Configuration
447
By default, the LLC2 local response time is 200ms.
Configuring BUSY Time
of LLC2
The LLC2 BUSY time refers to the waiting time before re-polling a busy site.
Perform the following command in Ethernet interface view.
By default, the LLC2 BUSY time is 300ms.
Configuring the P/F
Waiting Time of LLC2
The LLC2 Poll/Final (P/F) waiting time refers to the time of waiting for the
acknowledge frame after sending the P frame.
acknowledge frame after sending the P frame.
Perform the following command in Ethernet interface view.
By default, the LLC2 P/F waiting time is 5000ms.
Configuring the REJ
Status Time of LLC2
The REJ status time of the LLC2 refers to the time of waiting for the acknowledge
frame after forwarding the reject frame.
frame after forwarding the reject frame.
Perform the following command in Ethernet interface view.
By default, the REJ status time of LLC2 is 500ms.
Configuring SDLC to be
the Link Layer Protocol
Encapsulated in an
Interface
The SDLC is a kind of link layer protocol relative to the SNA, with working principle
similar to that of HDLC. In order that the DLSw can work normally, the
encapsulated link layer protocol of the synchronous serial port should be changed
into the SDLC.
similar to that of HDLC. In order that the DLSw can work normally, the
encapsulated link layer protocol of the synchronous serial port should be changed
into the SDLC.
Perform the following configuration in synchronous serial port view.
Table 512 Configuring local response time of LLC2
Operation
Command
Configure local response time of LLC2
llc2 timer ack mseconds
Restore local response time of LLC2 to the default value
undo llc2 timer ack
Table 513 Configuring BUSY time of LLC2
Operation
Command
Configure BUSY time of LLC2
llc2 timer busy mseconds
Restore the default LLC2 BUSY time
undo llc2 timer busy
Table 514 Configuring the P/F waiting time of LLC2
Operation
Command
Configure the P/F waiting time of LLC2
llc2 timer poll mseconds
Restore the default LLC2 P/F waiting time
undo llc2 timer poll
Table 515 Configuring the REJ status time of LLC2
Operation
Command
Configure the REJ status time of LLC2
llc2 timer reject mseconds
Restore the REJ status time of LLC2 to the default value
undo llc2 timer reject