3com 3031 Instruccion De Instalación

OSPF Configuration

511

The no-summary parameter generates inter-area default route which is advertised
via the Type-3 LSAs.

The

default-cost

parameter, which is only available for the NSSA ABR, defines

the cost value for the default route advertised by the ABR to the NSSA.

Enabling Opaque

Capacity of OSPF

Perform the following configuration in OSPF view.

If OSPF TE has been enabled in an area, then the

undo opaque-capability

command will fail in this area. See the MPLS part for the details about OSPF TE.

Configuring OSPF in

Concert with Network

Management System

Configuring OSPF MIB Binding

When multiple OSPF processes are enabled, you can configure OSPF MIB to opt for
the process under processing. In other words, you can configure which process
OSPF MIB is to be bound with.

Perform the following in the System View.

By default, MIB is bound with the first enabled OSPF process.

Configuring OSPF TRAP

OSPF can be configured to forward diversified SNMP TRAP packets and a certain
OSPF process can be specified via process number to send SNMP TRAP packets.

Perform the following in the System View.

Table 588 Enabling Opaque capacity of OSPF

Operation

Command

Enable Opaque capacity of OSPF

opaque-capability enable

Disalbe Opaque capacity of OSPF

undo opaque-capability

Table 589 Configuring OSPF MIB binding

Operation

Command

Configure OSPF MIB binding

ospf mib-binding process-id

Remove the default OSPF MIB binding

undo ospf mib-binding

Table 590 Configuring OSPF TRAP

Operation

Command

Enable OSPF TRAP

Disable OSPF TRAP