3com 3031 Instruccion De Instalación
536
C
HAPTER
41: I
NTEGRATED
IS-IS C
ONFIGURATION
automatically release the system CPU resources after processing a certain number
of routes , with the remaining routes being processed in one second.
of routes , with the remaining routes being processed in one second.
Perform the following in the IS-IS View.
By default, the CPU is released once after every 5000 routes have been processed.
Enabling/Disabling the
Interface to Send
Packets
In order to prevent a router from forwarding information to another router, the
Administrator can suppress advertisements on a particular interface.
Perform the following in the IS-IS View.
By default, the interface is allowed to receive and send IS-IS packets.
The
silent-interface
command will prevent an IS-IS peer from becoming
established over that interface.
Configuring IS-IS to
Import Routes of Other
Protocols
Routes imported into IS-IS from other routing protocols are considered external to
the IS-IS routing domain. A cost can be applied to the routes prior to importing the
routes into the IS-IS route table.
the IS-IS routing domain. A cost can be applied to the routes prior to importing the
routes into the IS-IS route table.
The IS-IS level of Level-1 or Level-2 can be specified when importing routes into
IS-IS.
IS-IS.
Perform the following in the IS-IS View.
If the level into which the routes are to be imported is not specified in the import
route command, the routes will be imported into Level-1-2 by default.
route command, the routes will be imported into Level-1-2 by default.
Table 618 Configuring SPF to release CPU actively
Operation
Command
Set the interval for SPF to release CPU actively
spf-delay-interval number
Restore the default setting
undo spf-delay-interval
Table 619 Enabling/Disabling the interface to send IS-IS packets
Operation
Command
Disable the interface to
send IS-IS packets
send IS-IS packets
silent-interface silent-interface-type
silent-interface-number
silent-interface-number
Enable the interface to send
IS-IS packets
IS-IS packets
undo silent-interface silent-interface-type
silent-interface-number
silent-interface-number
Table 620 Configuring IS-IS to import routes of other protocols
Operation
Command
Configure IS-IS to import
routes of other protocols
routes of other protocols
import-route protocol [ cost value ] [ type {
external | internal } ] [ level-1 ] [ level-1-2
] [ level-2 ] [ route-policy route-policy-name
]
external | internal } ] [ level-1 ] [ level-1-2
] [ level-2 ] [ route-policy route-policy-name
]
Disable IS-IS to import
routes of other protocols
routes of other protocols
undo import-route protocol [ cost value ] [
type { external | internal } ] [ level-1 ] [
level-1-2 ] [ level-2 ] [ route-policy
route-policy-name ]
type { external | internal } ] [ level-1 ] [
level-1-2 ] [ level-2 ] [ route-policy
route-policy-name ]