3com 3031 Instruccion De Instalación
![3com](https://files.manualsbrain.com/attachments/960452ff43b9899cbcffced60c87abf956e7967a/common/fit/150/50/f6ac125d7af2cf40fec58935fa6d4bf71457a57efe50bee91208a434f325/brand_logo.jpeg)
546
C
HAPTER
42: BGP C
ONFIGURATION
Configuring the interval at which route update messages are sent by a
peer (group)
peer (group)
By default, the intervals at which route update messages are sent by an IBGP and
EBGP peer (group) are 5 seconds and 30 seconds respectively.
EBGP peer (group) are 5 seconds and 30 seconds respectively.
Configuring to send the community attributes to a peer group
Configuring a peer group to be a route reflector client
Only the peer group whose configuration type is internal can be configured into a
reflector client.
reflector client.
By default, all IBGPs in the AS are fully-connected and the peers do not mutually
notify their learned IBGP routes so as to avoid creating route loops.
notify their learned IBGP routes so as to avoid creating route loops.
For detailed information on route reflector, refer to "Configure Route Reflector"
section of this manual.
section of this manual.
Configuring to send the default route to a peer group
By default, local router does not send the default route to any peer (group). This
command does not require that the default route should exist in the BGP routing
command does not require that the default route should exist in the BGP routing
Table 636 Configuring the interval at which route update messages are sent by a peer
(group)
(group)
Operation
Command
Configure the interval at which route update
messages are sent by a peer (group)
messages are sent by a peer (group)
peer group-name
route-update-interval seconds
route-update-interval seconds
Restore the default route update message
sending interval by a peer (group)
sending interval by a peer (group)
undo peer group-name
route-update-interval
route-update-interval
Table 637 Configuring to send the community attributes to a peer group
Operation
Command
Configure to send the community
attributes to a peer group
attributes to a peer group
peer group-name advertise-community
Not to send the community
attributes to a peer group
attributes to a peer group
undo peer group-name advertise-community
Table 638 Configuring a peer group to be a route reflector client
Operation
Command
Configure
a peer group to be a route reflector
client
peer group-name reflect-client
Disable
a peer group to be a route reflector client
undo peer group-name
reflect-client
reflect-client
Table 639 Configuring to send the default route to a peer group
Operation
Command
Configure to send the default route
to a peer group
to a peer group
peer group-name default-route-advertise
Remove to send the default route to
a peer group
a peer group
undo peer group-name
default-route-advertise
default-route-advertise