3com 3031 Instruccion De Instalación
![3com](https://files.manualsbrain.com/attachments/960452ff43b9899cbcffced60c87abf956e7967a/common/fit/150/50/f6ac125d7af2cf40fec58935fa6d4bf71457a57efe50bee91208a434f325/brand_logo.jpeg)
Displaying and Debugging Route Capacity
585
Disabling Automatic
Recovery of the
Disconnected Routing
Protocol
If memory automatic recovery function of a router is disabled, connection of
routing protocols will not be restored even if the free memory restores to the
safety value. Therefore, this configuration should be performed cautiously.
routing protocols will not be restored even if the free memory restores to the
safety value. Therefore, this configuration should be performed cautiously.
Perform the following configuration in System View.
By default, memory automatic recovery function is enabled.
Enabling Automatic
Recovery of the
Disconnected Routing
Protocol
Perform the following configuration in System View.
By default, memory automatic restoration function is enabled.
Displaying and
Debugging Route
Capacity
Debugging Route
Capacity
After the above configuration, execute
display
command in all views to display
the running of the route capacity configuration and to verify the effect of the
configuration.
configuration.
Table 683 Disabling automatic recovery of router memory
Operation
Command
Disable automatic recovery of router memory
memory auto-establish disable
Table 684 Enable automatic recovery of router memory
Operation
Command
Enable automatic recovery of router
memory
memory
memory auto-establish enable
Table 685 Display and debug route capacity
Operation
Command
Display memory setting and state
information related to route capacity
information related to route capacity
display memory limit