3com 3031 Instruccion De Instalación

■

You can press a hot key wherever you are allowed to type a command. Then 
the system will display the corresponding command as you have typed the 
complete command.

■

If you have typed part of a command and have not pressed <Enter>, you can 
press a hot key to clear the input and display the corresponding command just 
like deleting the input and typing a complete command.

■

A hot key is executed as a command, when the syntax is recorded to the 
command buffer and log for fault location and querying.

Please perform the following in the System View.

By default, CTRL_G, CTRL_L and CTRL_O correspond to the following commands 
respectively:

■

 (display current configuration)

■

 (display routing table information)

■

 (disable all the debugging functions)

The default values of the other hot keys are null.

Please perform the following configuration in all views.

Correlate the hot key CTRL_U with the 

 command 

and execute the hot key.

[3Com]hotkey ctrl_u display ip routing-table

[3Com]Press <Ctrl_u>

[3Com]display ip routing-table

Routing Table: public net

Destination/Mask   Proto   Pre Cost        Nexthop         Interface

      127.0.0.0/8  DIRECT   0   0        127.0.0.1       InLoopBack0

ESC_<

Set the cursor's location to the beginning of the clipboard 

ESC_>

Set the cursor's location to the end of the clipboard

Table 8   System hot keys

Table 9   Defining hot keys

Define hot keys

hotkey [ CTRL_G | CTRL_L | CTRL_O | CTRL_T | CTRL_U ] 

Recover the default values

undo hotkey [ CTRL_G | CTRL_L | CTRL_O | CTRL_T | CTRL_U ]

Table 10   Displaying the use of hot keys

Display the use of hot keys

display hotkey