3com 3031 Instruccion De Instalación
MBGP Multicast Extension Configuration
653
IBGP peer and EBGP peer cannot be added into one group.
Enabling a peer/peer group
Advertising MBGP community attributes to a peer/peer group
By default, no community attribute is advertised to any peer/peer group.
Configuring a peer/peer group as an MBGP route reflector client
By default, there is no route reflector in an autonomous system.
It is generally unnecessary to configure this command for a peer group. This
command is reserved for the occasional compatibility with network equipments of
other vendors.
command is reserved for the occasional compatibility with network equipments of
other vendors.
Table 748 Creating a peer group and adding members
Operation
Command
Create a peer group
group group-name
Delete the specified peer group
undo group group-name
Add a peer into the peer group
peer peer-address group group-name
Delete a peer from the peer group
undo peer peer-address group group-name
Reset the connection among all
members in the peer group (in user
view)
members in the peer group (in user
view)
reset bgp group group-name
Table 749 Enabling a peer/peer group
Operation
Command
Enable the specified peer group
peer { peer-address | group-name }
enable
Disable the specified peer group
undo peer { peer-address | group-name }
enable
Table 750 Configuring to advertise the community attributes to a peer/peer group
Operation
Command
Advertise the community attributes
to a peer group
to a peer group
peer { group-name | peer-address }
advertise-community
Configure not to advertise the
community attributes to a peer
group
community attributes to a peer
group
undo peer { group-name | peer-address }
advertise-community
Table 751 Configuring a peer/peer group as an MBGP route reflector client
Operation
Command
Configure a peer group as an MBGP
route reflector client
route reflector client
peer { group-name | peer-address }
reflect-client
Remove the above configuration
undo peer { group-name | peer-address }
reflect-client