3com 3031 Instruccion De Instalación

Enable outputting log information of IP module and allow outputting only the 
information with the severity of warnings and lower levels. 

[3Com]info-center source ip channel snmpagent log level warnings

Perform the following in the System View.

 specifies a module name and 

 stands for the default record 

in the information channel. 

 is the severity level of information and the 

information at a level greater than severity is prohibited to output. 

 is the 

setting of information level. 

and 

 are the 

information channel number and name to be set. 

Each information channel has a default record for which the module name is 

. But for different channels, the record may have different default settings 

for logging information, trapping information, and debugging information. If a 
module has no explicit configuration record in the channel, the default 
configuration record will be used.

By far, the information center of router's main software can output the 
information to six directions.

■

Output the information to a local Console via the Console port.

■

Output the information to a remote Telnet terminal in support of remote 
maintenance.

■

Allocate a logbuffer of proper size inside the router for recording information.

errors

Errors requiring attention but not quite critical

warnings

Warnings indicating the possible existence of 
errors

notifications

Information requiring attention

informational

Common prompt information

debugging

Debugging information

Table 29   Defining the contents of an information channel

Add a record to an 
information channel

Delete a record from an 
information channel

Table 28   Severities defined in syslog