3com 3031 Instruccion De Instalación
![3com](https://files.manualsbrain.com/attachments/960452ff43b9899cbcffced60c87abf956e7967a/common/fit/150/50/f6ac125d7af2cf40fec58935fa6d4bf71457a57efe50bee91208a434f325/brand_logo.jpeg)
IKE Configuration
857
authentication-algorithming algorithm, group ID, sa duration and authentication
method.
method.
Selecting Encryption Algorithm
This configuration is used to specify an encryption algorithm used by an IKE
proposal.
proposal.
Perform the following in the IKE Proposal View.
By default, the 56-bit DES algorithm in CBC mode is adopted.
Selecting Authentication method
This configuration is used to specify an authentication method used by an IKE
proposal. The authentication key must be configured when using the
authentication method of pre-shared key (refer to “Configuring pre-shared key”)
proposal. The authentication key must be configured when using the
authentication method of pre-shared key (refer to “Configuring pre-shared key”)
Perform the following in the IKE Proposal View
.
By default, pre-share key algorithm is adopted.
Selecting Authentication-algorithming Algorithm
This configuration is used to specify the authentication-algorithming algorithm
used by an IKE proposal.
used by an IKE proposal.
Perform the following in the IKE Proposal View.
By default SHA-1 authentication-algorithming algorithm is adopted.
Selecting Diffie-Hellman Group ID
This configuration is used to specify the Diffie-Hellman group ID used by an IKE
proposal.
proposal.
Table 927 Selecting encryption algorithm
Operation
Command
Select encryption algorithm
encryption-algorithm { des-cbc |
3des-cbc }
Set the encryption algorithm to the
default value
default value
undo encryption-algorithm
Table 928 Specifying authentication method
Operation
Command
Specify authentication method
authentication-method { pre-share }
Restore the authentication method to the
default value
default value
undo authentication-method
Table 929 Selecting authentication-algorithming algorithm
Operation
Command
Select authentication-algorithming
algorithm
algorithm
authentication-algorithm { md5 | sha }
Set authentication-algorithming
algorithm to the default value
algorithm to the default value
undo authentication-algorithm