3com 3031 Instruccion De Instalación
![3com](https://files.manualsbrain.com/attachments/960452ff43b9899cbcffced60c87abf956e7967a/common/fit/150/50/f6ac125d7af2cf40fec58935fa6d4bf71457a57efe50bee91208a434f325/brand_logo.jpeg)
Configuration File Management
59
initialization. Compared with the startup configuration, the valid configuration of
the router during running is called current configuration.
the router during running is called current configuration.
Perform the following configuration in any view.
The format used for displaying the configuration file is the same as that for saving
the file.
the file.
Modifying and saving the current configuration
The user can modify the current configuration of the router through the command
line interface. In order to make the current configuration as the startup
configuration of the router at the next power-on, the
line interface. In order to make the current configuration as the startup
configuration of the router at the next power-on, the
save
command is required
to save the current configuration into the default storage device.
Perform the following in the User View.
Executing the
save
command without the
safely
keyword increases the speed of
saving configuration files, but these files cannot survive a reboot or power-off
during the saving process. Executing the
during the saving process. Executing the
save
command with the
safely
keyword slows the saving speed , but these files can survive a reboot or power-off
during the saving process.
during the saving process.
By default, fast saving applies, which is recommended in an environment where
stable power supplies are available. In an environment where stable power
supplies are not available or in the case of remote maintenance, however, you are
recommended to execute the command with the
stable power supplies are available. In an environment where stable power
supplies are not available or in the case of remote maintenance, however, you are
recommended to execute the command with the
safely
keyword.
You are recommended to save the configurations using the save command before
rebooting the router so that the router can keep exactly the same configurations
after its reboot.
rebooting the router so that the router can keep exactly the same configurations
after its reboot.
Erasing the configuration file in the current storage device
Using the
reset saved-configuration
command, you can erase the
configuration file in the current storage device of the router. After the
configuration file is erased, default configuration parameters will be used for the
configuration file is erased, default configuration parameters will be used for the
Table 51 Displaying the router configuration
Operation
Command
Display the startup configuration
of the router
of the router
display saved-configuration
Display the current configuration
of the router
of the router
display current-configuration [
controller | interface interface-type [
interface-number ] | configuration [ bgp |
ospf | post-system | rip | system |
user-interface ] ]
controller | interface interface-type [
interface-number ] | configuration [ bgp |
ospf | post-system | rip | system |
user-interface ] ]
Display the running configuration
in the current view
in the current view
display this
Table 52 Saving the current configuration
Operation
Command
Save the current configuration
save [ file-name ] [ safely ]