3com 3031 Instruccion De Instalación

Typical Configuration Example of DVPN

923

Configuring server UDP port ID

Perform the following in the DPVN-class View.

Displaying and

Debugging DVPN

Please run the

reset dvpn map

and

debugging dvpn

commands in user view and

the

display dvpn map

command in any view.

Typical Configuration
Example of DVPN

DVPN Configuration

Examples

Networking requirements

In this example, the headquarters and subsidiaries are configured into VPN 100.
The headquarters router serves as DVPN server, with fixed public IP address
202.0.0.1 configured to WAN interface S0/0/0. Subsidiary routers serve as clients
and are connected to the headquarters through serial ports. Here the serial port IP
address for the client can either be private IP address or public IP address.

Table 997 Configuring server UDP port ID

Operation

Command

Configure server UDP port ID

udp-port port-number

Restore the default UDP port for server

undo udp-port

Table 998 Displaying and debugging DVPN

Operation

Command

Enable DVPN debugging

debugging dvpn { all | error | event |

hexadecimal | packet }

undo debugging dvpn { all | error | event |

hexadecimal | packet }

Display all map information
for the node

display dvpn map [ vpn-id vpn-id ] [

private-ip private-ip ]

Clear a specific session
tunnel

reset dvpn map [ private-ip ]