3com 5012 Manual De Usuario
106
3Com Router 5000/6000 Family
Command Reference
ospf
Use the
ospf
command to enable the OSPF protocol.
System view
ospf authentication-mode
Use the
ospf authentication-mode
command to configure the authentication mode and key between
adjacent routers.
Interface view
ospf cost
Use the
ospf cost
command to configure different packet sending costs so as to send packets from
different interfaces.
Interface view
ospf dr-priority
Use the
ospf dr-priority
command to configure the priority for electing the "designated router" on an
interface.
Interface view
ospf mib-binding
Use the
ospf mib-binding
command, MIB operation can be bound on the specified OSPF process.
System view
ospf mtu-enable
Use the
ospf mtu-enable
command to enable the interface to write MTU value when sending DD packets.
Interface view
ospf network-type
Use the
ospf network-type
command to configure the network type of OSPF interface.
Interface view
ospf timer dead
Use the
ospf timer dead
command to configure the dead interval of the OSPF neighbor.
Interface view
ospf timer hello
Use the
ospf timer hello
command to configure the interval for transmitting Hello messages on an
interface.
Interface view
ospf timer poll
Use the
ospf timer poll
command to configure the poll Hello message interval on nbma and p2mp
network.
Interface view
ospf timer retransmit
Use the
ospf timer retransmit
command to configure the interval for LSA re-transmitting on an interface.
Interface view
ospf trans-delay
Use the
ospf trans-delay
command to configure the LSA transmitting delay on an interface.
Interface view
ospf vpn instance
Use the
ospf
command to enable an OSPF process.
System view
option
Use the
option
command to specify the logical relationship between the addresses to be probed in the
detect group.
Detect Group view
outband
Use the
outband
command to configure transmission of DTMF code in the outband mode.
Voice Entity view
outband vofr
Use the
outband vofr
command to configure out-of-band transmission of DTMF codes.
Voice Entity view
overlap voip h323
Use the
overlap voip h323
command to configure the calling party to support h323 overlap mode for
sending numbers.
Voice Dial Program view