3com 5012 Manual De Usuario
3Com Router 5000/6000 Family
29
Command Reference
default tag
Use the
default tag
command to configure the default tag of OSPF when it redistributes an external route.
OSPF view
default type
Use the
default type
command to configure the default type when OSPF redistributes external routes.
OSPF view
delay
Use the
delay
command to configure the related time parameters at the digital E&M subscriber-line (E1
controller).
Digital E&M Voice Subscriber-Line view
delay
Use the
delay
command to configure the relevant time parameters on an FXO or analog E&M
subscriber-line.
FXO Voice Subscriber-Line view
delay-reversal
Use the
delay-reversal
command to configure the timer's interval of polarity-reverse transmission delay
on FXS interfaces.
Voice Subscriber-Line view
delete
Use the
delete
command to delete the specified file.
FTP Client view
delete
Use the
delete
command to delete the specified file from the server as you would with the
remove
command.
SFTP Client view
delete
Use the
delete
command to move the specified file from the storage device to the recycle bin, where you
can completely delete the file with the
undelete
command or restore it with the
reset recycle-bin
filename
command.
User view
delete rpf-route-static all
Use the
delete rpf-route-static all
command to delete all the static multicast routes.
System view
delete static-routes all
Use the
delete static-routes all
command to cancel all the static routes.
System view
description
Use the
description
command to configure port description. Identifying a port is the only function of this
command.
Ethernet Port view
description
Use the
description
command to briefly describe a test operation.
HWPing Test Group view
description
Use the
description
command to describe the interface.
Interface view
description
Use the
description
command to configure description information for a specified VPN instance.
Vpn-Instance view
description (in Voice Entity View)
Use the
description
command to configure a voice entity description string.
Voice Entity view
description (in Voice Subscriber-Line View)
Use the
description
command to configure a subscriber-line description character string.
FXO Voice Subscriber-Line view
destination
Use the
destination
command to specify the destination IP address to be filled in the added IP header at
the time of tunnel interface encapsulation.
Tunnel Interface view