3com 5012 Manual De Usuario
3Com Router 5000/6000 Family
49
Command Reference
display isdn parameters
Use the
display isdn parameters
command to view the system parameters at layers 2 and 3 of the ISDN
protocol, such as the durations of system timers and frame size.
Any view
display isdn spid
Use the
display isdn spid
command to view information on SPID on the BRI interface encapsulated with
the NI protocol.
Any view
display isis brief
Use the
display isis brief
command to view the brief information of IS-IS.
Any view
display isis interface
Use the
display isis interface
command to view the information of the IS-IS enabled interface.
Any view
display isis lsdb
Use the
display isis lsdb
command to view the link state database of the IS-IS.
Any view
display isis mesh-group
Use the
display isis mesh-group
command to view the IS-IS mesh group.
Any view
display isis peer
Use the
display isis peer
command to view IS-IS peer information.
Any view
display isis routing
Use the
display isis routing
command to view IS-IS routing information
Any view
display isis routing clns
Use the
display isis routing clns
command to display CLNS routing information generated by IS-IS
protocol.
Any view
display isis spf-log
Use the
display isis spf-log
command to view the SPF calculation log of the IS-IS.
Any view
display llc2
Use the
display llc2
command to view statistical information of LLC2.
Any view
display loadsharing ip address
Use the
display loadsharing ip address
command to view the statistics about the unbalanced load
sharing based on interface bandwidth, including the number and ratio of the packets sent from the interfaces
related to the equal-cost routes to a network address.
related to the equal-cost routes to a network address.
Any view
display local-server statistics
Use the
display local-server statistics
command to display statistics of the local RADIUS
authentication server.
Any view
display local-user
Use the
display local-user
command to view the relevant information on the specified local user or all
the local users. The output can help you troubleshoot faults related to local user.
Any view
display log startup
Use the
display log startup
command to display the state of the configuration restoration log switch.
User view
display logbuffer
Use the
display logbuffer
command to view the information recorded in the log buffer.
Any view
display logbuffer summary
Use the
display logbuffer summary
command to display a summary about the log buffer on the router.
Any view