3com 5012 Manual De Usuario
64
3Com Router 5000/6000 Family
Command Reference
dtmf threshold
Use the
dtmf threshold
command to configure the sensitivity of DTMF digit detection.
Voice Subscriber-Line view
duplex
Use the
duplex
command to set the operating mode of the Ethernet interface.
Ethernet Interface view
duplex
Use the
duplex
command to configure the duplex mode of the Ethernet port.
Ethernet Port view
dvpn class
Use the
dvpn class
command to create and enter a dvpn-class view.
System view
dvpn client register-dumb
Use the
dvpn client register-dumb
command to set the time when a client turns to dumb state after it
fails to register with a DVPN server for specified retries.
System view
dvpn client register-interval
Use the
dvpn client register-interval
command to set the register interval of a client.
System view
dvpn client register-retry
Use the
dvpn client register-retry
command to set the maximum retries for a client to register with a
DVPN server continuously.
System view
dvpn dvpn-id
Use the
dvpn dvpn-id
command to specify the DVPN domain the tunnel interface belongs to. This
command is valid when the tunnel interface is encapsulated as DVPN.
Tunnel Interface view
dvpn interface-type
Use the
dvpn interface-type
command to specify the type of a tunnel interface. A tunnel interface is of
client type by default.
Tunnel Interface view
dvpn policy
Use the
dvpn policy
command to create and enter a DVPN policy view.
System view
dvpn policy
Use the
dvpn policy
command to apply a specified DVPN policy to a tunnel interface that is of server type.
Tunnel Interface view
dvpn register-type
Use the
dvpn register-type
command to configure the type of the additional information when a client
registers with a DVPN server.
Tunnel Interface view
dvpn security
Use the
dvpn security acl
command to configure the ACL used for deciding which data stream needs
IPSec encryption on the tunnel interface.
Tunnel Interface view
dvpn server
Use the
dvpn server
command to configure the DVPN class to be applied to a tunnel interface.
Tunnel Interface view
dvpn server authentication-client method
Use the
dvpn server authentication-client method
command to specify the default way a DVPN server
authenticates clients.
System view
dvpn server map age-time
Use the
dvpn server map age-time
command to set the map age time of a DVPN server.
System view
dvpn server pre-shared-key
Use the
dvpn server pre-shared-key
command to set a pre-shared key for a DVPN server.
System view