3com 5012 Manual De Usuario
3Com Router 5000/6000 Family
67
Command Reference
esp encryption-algorithm
Use the
esp encryption-algorithm
command to set the encryption algorithm adopted by ESP.
IPSec Proposal view
exchange-mode
Use the
exchange-mode
command to select an IKE negotiation mode.
IKE-Peer view
execute
Use the
execute
command to execute the specified batch file.
System view
exit
Use the
exit
command to terminate the connection to the remote SFTP server and exit to system view as
you would with the
bye
and
quit
commands.
SFTP Client view
expired
Use the
expired
command to configure a valid period allowed for leasing IP addresses in a global DHCP
address pool.
DHCP Address Pool view
fast-connect
Use the
fast-connect
command to enable fast connect.
VoIP Voice Entity view
fax baudrate
Use the
fax baudrate
command to configure the highest fax baudrate enabled by the gateway.
Voice Entity view
fax ecm
Use the
fax ecm
command to configure the forced adoption of ECM mode at the gateway, that is, to make
the facsimiles at both ends support ECM mode.
Voice Entity view
fax level
Use the
fax level
command to configure the gateway carrier transmitting energy level.
Voice Entity view
fax local-train threshold
Use the
fax local-train
command to configure the percentage of fax local training threshold value.
Voice Entity view
fax nsf-on
Use the
fax nsf-on
common to configure the fax faculty transmission mode as Not Standard mode.
Voice Entity view
fax protocol
Use the
fax protocol
command to configure the protocol for intercommunication with other devices or
enable the fax Passthrough mode, and configure the number of redundant packets sent via the T.38 fax
protocol. The argument standard-t38 indicates the standard T38 negotiation mode specified by H323 or SIP
adopted.
protocol. The argument standard-t38 indicates the standard T38 negotiation mode specified by H323 or SIP
adopted.
Voice Entity view
fax support-mode
Use the
fax support-mode
command to configure the fax interworking mode with other equipments.
Voice Entity view
fax train-mode
Use the
fax train-mode
command to configure the training mode used by the gateway.
Voice Entity view
fdl
Use the
fdl
command to set the behavior of the CT1/PRI interface on the FDL in ESF framing.
CT1/PRI Interface view
fe1 clock
Use the
fe1 clock
command to configure clocking on the E1-F interface.
E1-F Interface view
fe1 code
Use the
fe1 code
command to configure the line code format of the E1-F interface.
E1-F Interface view